Bridge structures require extremely thick steel plates for main girders, cross beams, and connection nodes. Bridge construction has very strict welding standards and safety requirements. Traditional flame or plasma cutting causes large heat-affected zones and edge deterioration. Bevel preparation for thick plate welding is time-consuming and hard to control accurately. High-power fiber laser cutting systems handle thick bridge steel plates with high precision and minimal heat input, ensuring the safety and longevity of the bridge structure.
For ultra-large format thick bridge girders and nodes
Recommended Power: 20000W / 30000W / 40000W
Equipped with advanced thick-plate bevel cutting head
For heavy bridge steel plates and large cross beams
Recommended Power: 12000W ~ 30000W
High stability for continuous bridge fabrication
For cutting bridge tubular structures and large supports
Recommended Power: 6000W / 12000W
Excellent 3D intersection and beveling capability
For bridge structural node assembly and on-site welding
Recommended Power: 2000W / 3000W, water cooling
High efficiency and deep penetration for thick plates
Sample Display: Thick bridge girder beveled sample, splice plate dense holes, steel pier node cutting sample
Reference Parameter: 50mm bridge structural steel, 30000W laser, Oxygen assist, Cutting speed: 0.8 m/min, minimal HAZ, precise bevel angle.
| Item | Traditional Flame / Plasma Cutting | High-Power Fiber Laser Cutting |
|---|---|---|
| Heat-Affected Zone (HAZ) | Large HAZ, high risk of material property alteration | Narrow HAZ, preserves material toughness and strength |
| Bevel for Thick Plates | Requires secondary machining, low efficiency | One-step precise bevel forming, improves welding efficiency |
| Edge Quality for Safety | Rough edges, requires extensive grinding, fatigue risk | Smooth edges, precisely prepared for high-strength welds |
Q1: Can the machine cut bridge steel plates over 50mm thick?
A: Yes, with high-power laser sources (20000W-40000W), we can efficiently cut thick bridge structural steel with high quality.
Q2: How does the machine prepare bevels for thick plates?
A: The specialized bevel cutting head cuts the V-groove or Y-groove in one step while cutting the contour, preparing the plate for welding.
Q3: Is the heat-affected zone small enough to prevent bridge deformation?
A: Absolutely. The focused laser beam produces a very narrow heat-affected zone due to the high cutting speed, greatly preserving material properties and preventing deformation of the bridge steel plates.
Auto Tag: Steel Structure Manufacturing - Heavy Bridge Structures