Alloy steel and wear-resistant plates (like NM400, NM500) are used in demanding environments. Their extreme hardness makes traditional machining very difficult, causing severe tool wear and slow processing. Thermal cutting can alter the hardness of the edge, leading to premature failure of the wear part. High-power fiber laser cuts through alloy and wear-resistant steels with ease. Being a non-contact process, it avoids tool wear completely and preserves the hardness and wear resistance of the material.
For thick wear-resistant plates and heavy alloy steel parts
Recommended Power: 12000W ~ 30000W
High stability and fast cutting for hard materials
For ultra-large format alloy steel plate cutting
Recommended Power: 12000W / 20000W
Excellent for multi-plate nesting and mass production
Cost-effective for medium-thick alloy steel plates
Recommended Power: 6000W / 12000W
High precision for dense bolt-hole arrays
For wear part assembly and on-site repair welding
Recommended Power: 2000W, water cooling
Deep penetration for thick wear-resistant materials
Sample Display: NM500 wear plate cutting, excavator bucket edge part, alloy steel structural bracket
Reference Parameter: 20mm NM400 wear-resistant steel, 12000W laser, Air/Oxygen assist, Cutting speed: 1.5 m/min, minimal HAZ, preserved hardness.
| Item | Traditional Machining / Plasma | Fiber Laser Cutting |
|---|---|---|
| Tool Wear & Cost | Severe tool wear, frequent replacement, high cost | No contact, zero tool wear, low maintenance cost |
| Cutting Hard Materials | Extremely slow, high difficulty, prone to cracking | Efficient, high precision, smooth cutting surface |
| Material Property Integrity | Large heat-affected zone, may soften the edge | Narrow HAZ, preserves wear resistance precisely |
Q1: Can the laser cut wear-resistant steel without losing its hardness?
A: Yes, the narrow heat-affected zone of laser cutting preserves the material's mechanical properties and hardness.
Q2: How does it handle the extreme hardness of NM400 or NM500?
A: Being a non-contact process, the laser doesn't suffer from tool wear and can cut hard materials efficiently.
Q3: Is it suitable for drilling dense holes in hard alloy steel?
A: Yes, it can precisely cut dense bolt-hole arrays in one step, avoiding the slow sequential drilling process.
Auto Tag: Steel Processing - Alloy Steel & Wear Parts