LED light‑box housing components mainly adopt galvanized sheet and thin stainless‑steel plate, including box frame, back‑plate, lamp‑source mounting hole arrays and wire‑pass openings. Different custom light‑box projects generate large numbers of non‑standard shell dimension variants. Traditional stamping dies require high investment; mechanical stamping easily scratches and peels the protective galvanized coating. Separate drilling procedures for lamp‑holes produce accumulated hole‑position deviation. Small‑batch custom light‑box orders cannot afford high stamping‑die cost. Fiber laser can one‑step complete shell outline, lamp‑hole array and wire‑pass openings. Nitrogen‑assist cutting reduces galvanized layer damage risk, supports indoor and outdoor light‑box custom‑project and standardized batch‑production.
Suitable for light‑box back‑plate, shell and lamp‑hole array sheet processing
Recommended Power:1500W / 3000W / 6000W
Nitrogen cutting for galvanized & stainless‑steel advertising sheet
For mixed production of light‑box sheet shells and mounting tubular support parts
Recommended Power: 1500W ~ 6000W
Free switch between sheet‑plate and tube processing
Mass cutting for light‑box mounting thin‑wall tubular frame profiles
Recommended Power: 3000W / 6000W
Burr‑free tube notch & hole processing
LED light‑box shell frame assembly welding
Recommended Power:1500W / 2000W, water cooling
Sample Display: Light‑box galvanized back‑plate sample, lamp‑hole array cutting sample, custom‑size light‑box shell sample
Reference Parameter:1.2mm galvanized light‑box sheet,3000W laser, Nitrogen assist, Cutting speed:3.8 m/min, low galvanized‑layer burn‑off, burr‑free edge.
| Item | Stamping + Separate Drilling Process | Fiber Laser Cutting |
|---|---|---|
| Galvanized‑Sheet Surface Coating Protection | Stamping easily causes coating scratch & peeling defect | Nitrogen‑assist cutting greatly reduce galvanized‑layer damage risk |
| Custom Non‑Standard Size Light‑Box Shell | Need stamping‑die modification, high cost & long lead‑time | Mould‑free, generate shell parts directly from CAD drawing |
| Lamp‑Hole Array Position Consistency | Multi‑step clamping brings accumulated hole‑position deviation | Outline and all lamp‑holes finished within single‑clamping procedure |
Q1: Can laser cut galvanized light‑box sheet without severe galvanized‑layer burning?
A: Yes, adopt optimized high‑pressure nitrogen‑assist parameters, effectively reduce galvanized‑layer burning‑off and peeling phenomenon.
Q2: Is laser suitable for small‑batch non‑standard custom light‑box shell production?
A: Very suitable, no dedicated mould required; quickly produce shell and back‑plate parts from customer CAD drawings.
Q3: What laser power is commonly used for LED light‑box housing parts?
A: 1500W‑6000W is mainstream power configuration for advertising light‑box sheet processing.
Auto Tag: Sign & Advertising‑LED Light Box Housing Parts