Exhibition and advertising display‑stand products consist of sheet‑metal panels and thin‑wall square‑tube frame components. Each trade‑show project mostly adopts personalized custom structural design. Traditional manufacturing needs multiple custom fixtures for sheet‑tube mixed‑parts production. Small‑batch exhibition prototype proofing brings high fixture cost. Mechanical tube sawing and drilling will generate heavy burrs, which requires large‑volume manual deburring work. Sheet‑tube integrated laser equipment can process exhibition‑stand sheet panels and thin‑wall square‑tube frames at one machine. Burr‑free tube notch and hole cutting reduces manual post‑processing. Mould‑free workflow quickly outputs custom‑structure stand parts from CAD drawings, fits trade‑show booth, retail pop‑up display small‑batch custom orders.
Suitable for exhibition‑stand display panel and demo support sheet parts
Recommended Power:1500W / 3000W / 6000W
Nitrogen cutting for advertising display sheet‑metal parts
For mixed production of display‑stand sheet panels and thin‑wall tubular frames
Recommended Power: 1500W ~ 6000W
Free switch between sheet‑plate and tube processing
Mass cutting for exhibition‑stand thin‑wall square‑tube frame profiles
Recommended Power: 3000W / 6000W
Burr‑free tube notch & hole processing
Advertising display & exhibition‑stand frame assembly welding
Recommended Power:1500W / 2000W, water cooling
Sample Display: Exhibition‑stand frame tube‑notch sample, pop‑up display‑stand panel sample, demo‑support‑bracket sheet sample
Reference Parameter:20×20×1.2mm display‑stand square tube,3000W tube laser, Nitrogen assist, burr‑free notch and mounting‑hole cutting.
| Item | Sawing + Stamping + Drilling Process | Fiber Laser Cutting |
|---|---|---|
| Tube End Notch & Hole Quality | Heavy burr, must carry out manual secondary deburring | Burr‑free one‑step forming, reduce post‑processing labor cost |
| Personalized Exhibition‑Project Prototype | Need custom fixture, long preparation cycle and high cost | Mould‑free, produce stand‑parts directly from CAD drawing |
| Sheet‑Tube Mixed‑Component Production | Two separate production workflows, high management cost | Sheet‑tube‑integrated machine complete sheet and tube parts together |
Q1: Can tube laser process thin‑wall square‑tube frames for exhibition display‑stand?
A: Yes, PR‑PT triple‑chuck tube laser can realize stable burr‑free notch and hole processing for exhibition thin‑wall square‑tube frames.
Q2: Is sheet‑tube‑integrated machine fit for small‑batch custom exhibition‑stand prototype?
A: Very suitable, no dedicated fixture or mould needed, quickly output sheet‑panel and tubular‑frame parts by CAD drawings.
Q3: What laser power is commonly used for advertising exhibition‑stand sheet‑tube parts?
A: 1500W‑6000W is mainstream power configuration for advertising display‑stand sheet‑tube mixed‑parts.
Auto Tag: Sign & Advertising‑Advertising Display & Exhibition Stand