Ship cabins and bulkheads include partition panels, stiffeners, door frames, and ventilation cutouts. These components often use thin to medium steel plates and require numerous lightening holes and access openings. Traditional punching or shearing processes cause plate distortion. Different ship layouts require frequent changes in cutting patterns, making traditional die-based methods inefficient and costly. Fiber laser cutting offers a non-contact solution that completely eliminates mechanical deformation, allows instant switching between different cabin designs, and provides clean edges ready for subsequent painting or welding processes.
Suitable for thin to medium cabin partition panels and bulkhead parts
Recommended Power: 1500W / 3000W / 6000W
High precision for complex ventilation cutouts
For mixed production of cabin sheet parts and structural tubular stiffeners
Recommended Power: 1500W ~ 6000W
Free switch between sheet-plate and tube processing
For cabin module assembly and bulkhead stiffener welding
Recommended Power: 1500W / 2000W, water cooling
Flexible cutting for small cabin components and on-site repair parts
Recommended Power: 1000W / 1500W / 3000W
Space-saving design for shipyard workshops
Sample Display: Cabin partition panel with ventilation cutouts, bulkhead stiffener notches, precision door frame sample
Reference Parameter: 5mm marine steel plate, 6000W laser, Oxygen/Air assist, Cutting speed: 3.5 m/min, zero deformation, clean edge ready for painting.
| Item | Punching / Shearing Process | Fiber Laser Cutting |
|---|---|---|
| Thin Plate Deformation | High risk of mechanical distortion and warping | Non-contact processing, zero mechanical deformation |
| Design Changes (Cabin Layouts) | Requires new dies or molds, long lead time | Mould-free, instant switch via CAD software |
| Complex Cutouts (Ventilation) | Requires multiple steps, slow and inefficient | One-step cutting of dense hole arrays and complex shapes |
Q1: Can laser cutting handle thin ship plates without deformation?
A: Yes, fiber laser cutting is a non-contact thermal process. With optimized parameters, the heat input is minimal, completely avoiding the mechanical deformation caused by punching or shearing.
Q2: How fast can we switch to a different cabin design?
A: Since it is a mould-free process, you just need to import the new CAD drawing into the software. The machine can switch to the new design instantly, significantly reducing setup time.
Q3: Are the edges clean enough for direct painting?
A: Yes, the laser cut edges are smooth and clean, often requiring no or minimal secondary grinding before anti-corrosion painting or coating.
Auto Tag: Shipbuilding Manufacturing - Ship Cabin & Bulkhead Parts