Buckets & Working Attachments Industry Laser Solution
Laser Cutting for Excavator Buckets, Rock Buckets, Grapples & Working Attachments | Wear‑Resistant Steel Cutting, Tooth‑Seat One‑Step Forming
Industry Background
Excavator buckets, loader buckets, crusher buckets, grapples and other working attachments are core consumable components for construction machinery. A large number of NM400 / NM450 high‑hardness wear‑resistant steel plates are widely used for liner, bottom plate and tooth‑seat base. Traditional thermal cutting has poor performance on wear‑resistant steel, with heavy slag and low efficiency. Tooth‑seat bases, side plates and wear liners contain many special‑shaped notches and mounting holes. Working attachments are highly customized according to different working conditions. High‑power fiber laser can process high‑hardness wear‑resistant steel, finish outline, notches and holes in one cutting pass, adapting to custom sample trial‑production and batch manufacturing of various attachments.
Sub Application Scenarios
- ✅ Bucket Side & Bottom Plate: Earth‑moving / rock bucket main‑plate blanking
- ✅ Tooth‑Seat Base Plate: Tooth‑seat mounting base, notch and positioning hole processing
- ✅ Wear‑Resistant Liner: NM series wear‑plate cutting for bucket anti‑abrasion protection
- ✅ Grapple & Crusher Attachment: Special‑shaped plate parts for grab and crushing working tools
- ✅ Auxiliary Process: Laser welding for bucket assembly, cleaning before hard‑facing welding
Industry Pain Points
- Conventional flame / plasma cutting produces heavy slag when processing NM wear‑resistant steel, requires lots of post‑cleaning work.
- Bucket tooth‑seat bases need notches and multi‑hole machining, multiple separate processes reduce production efficiency.
- Large variety of custom attachments for different site conditions, frequent drawing modification.
- Wear‑resistant steel has high hardness; improper cutting will cause crack risk on workpiece edge.
- Mixed material batches: ordinary carbon‑steel and high‑hardness wear‑resistant steel co‑exist in one bucket.
- Small‑batch custom attachment orders and mass‑production orders exist at the same time.
Our Targeted Laser Solution
- High‑power laser realizes stable cutting for NM400 / NM450 wear‑resistant steel plate, less slag and fewer edge‑crack risks.
- Bucket side plate, tooth‑seat base and wear liner finish contour, notches and mounting holes in one‑step cutting procedure.
- No custom mould or fixture, fast program adjustment for custom‑built working attachments.
- Reasonable parameter configuration for mixed‑material production of carbon‑steel and wear‑resistant‑steel components.
- Oxygen assist gas optimized for thick wear‑resistant steel to balance cutting speed and finished‑part quality.
- Flexible production mode, fit both small‑batch custom samples and large‑volume bucket‑attachment orders.
Recommended Machine Models
High Power Heavy‑Duty Sheet Laser Cutter
Suitable for bucket main‑plate and NM series wear‑resistant liners
Recommended Power: 6000W / 12000W / 20000W
Optimized parameters for high‑hardness wear‑resistant steel
View Details
Sheet & Tube Integrated Laser Machine
For mixed production of bucket plates and attachment tubular frames
Recommended Power: 3000W ~ 12000W
Free switch between sheet‑plate and tube processing
View Details
PR‑PT Triple Chuck Tube Laser Cutter
Mass cutting for attachment support tubular profiles
Recommended Power: 3000W / 6000W
Burr‑free tube notch & hole processing
View Details
Handheld Laser Welder
Bucket & working‑attachment assembly splicing welding
Recommended Power:1500W / 2000W, water cooling
View Details
Samples · Processing Parameters · Capacity Comparison
Sample Display: Bucket side‑plate cutting sample, tooth‑seat base part, NM wear‑resistant liner sample
Reference Parameter:12mm NM400 wear‑resistant steel plate,12000W laser, Oxygen assist, Cutting speed:0.65 m/min, low‑slag cutting edge.
| Item |
Plasma / Flame Cutting |
High‑Power Laser Cutting |
| Wear‑Resistant Steel Cutting Quality |
Heavy slag, edge crack risk, heavy post‑cleaning work |
Less slag, controlled edge quality for NM series steel |
| Tooth‑Seat Notch & Hole Process |
Multiple separate processes, low efficiency |
Notch + holes finished at one procedure |
| Custom Attachment Iteration |
Need fixture rework, long lead‑time |
Fast, only modify cutting program |
Customer Benefits & ROI
- Reduce slag‑cleaning and secondary processing workload for wear‑resistant steel bucket parts.
- Cancel partial independent notching and drilling procedures, improve bucket production throughput.
- Save fixture investment for many kinds of custom working attachments.
- Accelerate custom attachment sample development, shorten delivery cycle for special‑working‑condition orders.
FAQ
Q1: Can laser cut NM400 / NM450 wear‑resistant steel for bucket liners?
A: Yes, our high‑power laser equipment has mature parameter database for NM series wear‑resistant steel.
Q2: Can laser complete tooth‑seat base notch and mounting hole in one cutting?
A: Yes, tooth‑seat outline, notch and all mounting holes can be finished in one‑step cutting.
Q3: Is laser suitable for small‑batch custom grapple / crusher attachment?
A: Precise match, no mould needed, quickly produce small‑batch custom attachment parts after importing CAD drawings.