Boom & Arm Structures Industry Laser Solution
Laser Cutting for Excavator, Crane & Aerial‑Work‑Platform Boom‑Arm Parts | Bevel Cutting, Complex Contour, Welding‑Ready Cut Edges
Industry Background
Boom and arm assemblies are core load‑bearing welded components widely used in excavators, truck cranes, truck‑mounted cranes and aerial work platforms. Main materials are Q355 high‑strength medium‑thick steel plate. Production requires bevel edges for welding, special notches and precise pin‑shaft holes. Traditional machining needs multiple separate processes including sawing, planing and drilling. Many arm‑structure variants lead to frequent drawing updates. High‑power laser can finish contour, bevel and pin holes in single cutting pass, well suited for both prototype trial‑run and mass production of boom‑arm parts.
Sub Application Scenarios
- ✅ Main Boom Plate: Thick‑plate outline cutting, welding bevel processing
- ✅ Intermediate Arm & Extension Arm: Special notches, pin‑shaft hole group machining
- ✅ Boom End Connection Ear Plate: Complex contour and multi‑hole precision cutting
- ✅ Reinforcement Stiffener for Arm: Irregular shape blanking and positioning holes
- ✅ Auxiliary Process: Laser welding for boom assembly, cleaning weld‑joint oxide layer
Industry Pain Points
- Traditional planer for welding bevel consumes long processing time and low efficiency.
- Separate cutting and drilling brings accumulated position error of pin‑holes.
- Plate deformation caused by thermal cutting leads to uneven assembly welding gaps.
- Many custom arm variants, fixture re‑work is required after drawing modification.
- Strict dimensional tolerance directly affects boom movement smoothness and service life.
- Mixed‑thickness plate materials increase process complexity for arm production.
Our Targeted Laser Solution
- High‑power laser realizes direct welding bevel cutting, ready for subsequent welding procedure.
- Outline, notches and pin‑shaft hole groups are completed in one‑step cutting to eliminate accumulated tolerance.
- Controlled heat‑input reduces plate deformation, guarantee consistent welding‑joint gaps for boom assembly.
- Program modification replaces physical fixture re‑work when arm drawings get updated.
- Oxygen / nitrogen cutting optional for different plate thickness, balance cutting quality and operation‑cost.
- Adapt to excavator, truck‑crane and aerial‑platform boom‑arm parts for small‑batch sample and large‑volume orders.
Recommended Machine Models
High Power Heavy‑Duty Sheet Laser Cutter
Suitable for thick boom main‑plate and reinforcement plates
Recommended Power: 6000W / 12000W / 20000W
Support bevel cutting for welding preparation
View Details
Sheet & Tube Integrated Laser Machine
For mixed production of arm plates and auxiliary tubular components
Recommended Power: 3000W ~ 12000W
Switch freely between sheet‑plate and tube processing
View Details
PR‑PT Triple Chuck Tube Laser Cutter
Mass cutting for boom auxiliary rectangular‑tube profiles
Recommended Power: 3000W / 6000W
Burr‑free tube notch & hole processing
View Details
Handheld Laser Welder
Boom‑arm assembly splicing welding
Recommended Power:1500W / 2000W, water cooling
View Details
Samples · Processing Parameters · Capacity Comparison
Sample Display: Boom main‑plate cutting sample, arm‑end ear‑plate, arm reinforcement stiffener sample
Reference Parameter:12mm Q355 boom‑arm steel plate,12000W laser, Oxygen assist, Cutting speed:0.9 m/min, available for direct welding‑bevel output.
| Item |
Planing + Flame Cutting + Drilling |
High‑Power Laser Cutting |
| Welding Bevel Process |
Need independent planing procedure, time‑consuming |
Direct bevel cutting finished in one pass |
| Pin‑Hole Position Accuracy |
Multi‑step processing brings accumulated tolerance |
Contour and holes finished at one procedure |
| Drawing‑Change Response |
Require fixture adjustment or remake |
Fast, only update cutting program |
Customer Benefits & ROI
- Cancel independent bevel‑planing station, save manpower and shorten whole production cycle.
- Reduce pin‑hole position deviation, improve boom‑arm assembly and movement reliability.
- Lower fixture modification investment caused by arm‑structure drawing revisions.
- Decrease welding‑gap correction work, improve boom welding‑assembly qualification rate.
FAQ
Q1: Can laser machine cut welding bevel directly for boom‑arm thick plates?
A: Our high‑power laser equipment supports bevel cutting, output parts can go to welding procedure directly.
Q2: Can it process both arm plates and auxiliary tube parts for boom assembly?
A: Yes, sheet‑tube integrated laser machine handles both arm steel plates and matching tubular accessories.
Q3: What plate thickness range is suitable for boom‑arm laser cutting?
A: 20kW model can process up to 40mm Q355 high‑strength steel for heavy‑duty boom‑arm components.