Medical tubing (catheters, IV tubes) and needles require absolute precision and a completely clean inner bore to ensure fluid flow and patient safety. Traditional sawing creates burrs that can trap bacteria or block flow, and mechanical cutting can easily deform thin-walled medical tubes. Our specialized tube laser cutting machines provide burr-free, high-precision cutting for medical tubes and needles, leaving a clean inner bore and ensuring optimal fluid dynamics.
For high-precision cutting of long medical tubes and catheters
Recommended Power: 1000W / 2000W
Excellent 3D cutting for complex angled needle tips
For high-precision small components and micro-cutting
Recommended Power: 1000W / 1500W
Enclosed design ensures a clean and sterile environment
Cost-effective for standard medical tube cutting
Recommended Power: 1000W / 1500W
Burr-free cutting for clean fluid paths
For medical tube assembly and seamless joint welding
Recommended Power: 1000W / 1500W, water cooling
Beautiful weld seams, reducing post-grinding
Sample Display: Stainless steel cannula tip, angled catheter shaft, thin-walled IV tube
Reference Parameter: 1.0mm stainless steel tube, 1000W laser, Nitrogen assist, Cutting speed: 6.0 m/min, zero burrs, precise angled tip.
| Item | Traditional Sawing / Mechanical Cutting | Fiber Laser Tube Cutting |
|---|---|---|
| Inner Bore Cleanliness | Burrs trap bacteria and block fluid flow | Burr-free cutting ensures a completely clean bore |
| Thin-Wall Deformation | Mechanical force causes tube crushing or deformation | Non-contact process, zero deformation |
| Complex Angled Tips | Hard to achieve precise bevels manually | Precise, complex 3D angled cuts for needle tips |
Q1: Can the laser cut tubes without leaving any burrs inside?
A: Yes, the laser cutting process is non-contact and clean, producing minimal to no burrs. For high-purity systems, nitrogen is used to ensure an oxidation-free and burr-free edge inside and out.
Q2: How does it handle extremely thin-walled medical tubes?
A: Because there is no physical cutting force, the laser will not crush or dent even the thinnest medical tubes, preserving their precise roundness.
Q3: Can it produce sharp angled tips for needles?
A: Absolutely. Our 3D tube lasers easily cut complex bevels and angled profiles for hypodermic needles and cannulas.
Auto Tag: Laboratory & Medical Equipment - Medical Tubing & Needles