Fitness decorative and connecting hardware includes equipment appearance decorative covers, connecting angle sheets, limit stop sheets and assembly positioning clips, belonging to small‑size complex special‑shape sheet‑metal components. Fitness‑product facelift and appearance upgrading will frequently update hardware‑part drawings. Traditional stamping mould investment is not economical for small‑batch facelift prototype orders. Exposed decorative parts require scratch‑free high‑quality surface. Thin sheet material is easy to warp under stamping mechanical squeezing pressure. Precision fiber laser can realize arbitrary complex contour and hole one‑step cutting. Non‑contact processing avoids mechanical scratch and deformation, suitable for fitness‑equipment facelift prototype trial‑production and mass‑volume hardware‑part orders.
Suitable for fitness decorative cover, angle‑bracket and clip thin‑sheet hardware
Recommended Power:1500W / 3000W / 6000W
Nitrogen cutting for high‑quality appearance sheet‑metal parts
For mixed production of decorative‑hardware sheets and small auxiliary tubular fittings
Recommended Power: 1500W ~ 6000W
Free switch between sheet‑plate and tube processing
Mass cutting for small‑size fitness auxiliary tubular hardware parts
Recommended Power: 3000W / 6000W
Burr‑free tube notch & hole processing
Fitness decorative & connecting‑hardware component assembly welding
Recommended Power:1500W / 2000W, water cooling
Sample Display: Fitness appearance decorative‑cover sample, connecting angle‑bracket sample, positioning‑clip sheet‑part sample
Reference Parameter:1.0mm cold‑rolled fitness decorative sheet,3000W laser, Nitrogen assist, Cutting speed:4.5 m/min, scratch‑free clean edge for painting.
| Item | Stamping Process | Fiber Laser Cutting |
|---|---|---|
| Complex Special‑Shape Small Hardware Parts | Restricted by mould contour, high cost for complex shapes | Arbitrary complex contour finished without stamping mould |
| Fitness‑Facelift Small‑Batch Prototype | Need mould opening, poor economic benefit | Mould‑free, produce parts directly from CAD drawing |
| Exposed Decorative‑Part Surface Protection | Stamping easily brings scratch & sheet‑warp defect | Non‑contact low‑heat‑input cutting protects appearance surface |
Q1: Can laser cut tiny complex fitness decorative‑connecting hardware?
A: Yes, precision fiber‑laser can realize fine contour cutting for small‑size fitness sheet‑metal hardware components.
Q2: Is laser suitable for fitness‑facelift small‑batch hardware‑part prototype?
A: Very suitable, no mould required, quickly generate trial‑production parts by importing CAD files.
Q3: What laser power is commonly used for fitness thin‑sheet decorative hardware?
A: 1500W‑6000W is mainstream power configuration for fitness appearance‑hardware sheet‑metal processing.
Auto Tag: Fitness Equipment‑Fitness Decorative & Connecting Hardware