New‑energy vehicle battery‑system components are mainly made of high‑reflectivity aluminum alloy, including battery tray housing, reinforcement gussets, cooling‑plate brackets and module mounting plates. Battery housing puts forward strict requirements for low‑burr and low‑thermal‑deformation cutting quality, because burr or thermal distortion will seriously affect subsequent sealing‑welding performance. Different EV platforms generate a large number of battery‑tray structural variants. EV development projects need multiple rounds of battery‑pack prototype iteration and reliability test. High‑power fiber laser with special aluminum‑processing parameters can realize stable cutting for aluminum‑alloy battery‑tray plates, adapt new‑energy vehicle R&D prototype trial‑run and variant batch production.
Suitable for battery‑tray aluminum‑alloy housing and reinforcement gussets
Recommended Power:6000W / 12000W / 20000W
Optimized parameters for high‑reflectivity aluminum alloy
For mixed production of battery‑tray sheets and auxiliary tubular support parts
Recommended Power: 6000W ~ 20000W
Free switch between sheet‑plate and tube processing
Mass cutting for battery‑system auxiliary thin‑wall tubular profiles
Recommended Power: 6000W / 12000W
Burr‑free tube notch & hole processing
Battery‑pack prototype component assembly welding
Recommended Power:1500W / 2000W, water cooling
Sample Display: EV battery‑tray housing sample, reinforcement gusset, battery‑module mounting‑plate sample
Reference Parameter:4mm battery‑tray aluminum alloy plate,12000W laser, Nitrogen assist, Cutting speed:1.8 m/min, low‑thermal‑deformation low‑burr edge.
| Item | Stamping Process | Fiber Laser Cutting |
|---|---|---|
| High‑Reflectivity Aluminum‑Alloy Processing | Stamping brings mechanical scratch and sheet spring‑back risk | Dedicated aluminum‑parameter database realizes stable non‑contact cutting |
| Multi‑Round Battery‑Pack Prototype Iteration | Need stamping‑mould opening, high cost and long lead‑time | Mould‑free, directly produce test‑parts from CAD drawings |
| Battery‑Housing Sealing‑Welding Condition | Stamping burr & spring‑back affect assembly & sealing performance | Control burr & thermal‑deformation, meet sealing‑welding requirements |
Q1: Can fiber laser cut high‑reflectivity aluminum‑alloy EV battery‑tray?
A: Yes, high‑power laser matched with special aluminum‑processing parameters can realize stable cutting for battery‑tray aluminum alloy plates.
Q2: Can laser control thermal deformation for thin‑medium battery‑tray aluminum sheets?
A: Optimize power, speed and gas pressure parameters, effectively control heat input and reduce aluminum‑sheet thermal‑warping risk.
Q3: What laser power is commonly used for new‑energy vehicle battery‑tray aluminum‑alloy components?
A: 12000W‑20000W is mainstream power configuration for EV battery‑tray aluminum‑alloy plate processing.
Auto Tag: Automotive Manufacturing‑EV Battery Pack & Tray Components